D-Link DSL-2750U User Manual page 35

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Parameter
Name
Connection Type
Enable
Direction
Physical interface
VPI
VCI
Encapsulation Mode
QoS
General settings
A name for connection for easier identification.
A type of network protocol to be used by the connection. Available
values:
PPPoA
•
PPPoE
•
IPoE
•
IPoA
•
Bridge.
•
Select the checkbox to enable the connection.
The direction of this connection.
Physical layer
A physical or virtual interface to which the new connection will be
assigned. Leave the Create value to create a new interface at the
physical layer.
Virtual Path Identifier.
Virtual Circuit Identifier.
Select LLC or VC from the drop-down list.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications that
allow various delays and losses of packets. It is appropriate to use the
UBR service for text/data/image transfer applications, as well as
messaging, distribution, retrieval, and remote terminal applications.
UBR With PCR
(Unspecified Bit Rate with Peak Cell Rate): The UBR service is used
for applications that allow various delays and losses of packets. The
Peak Cell Rate is a determining factor in how often cells are sent in
an effort to minimize lag or jitter caused by traffic inconsistencies.
When you select this value from the drop-down list, the Peak Cell
Rate field is displayed. Specify a required value (in cells per
second).
Page 35 of 110
Configuring via Web-based Interface
Description
The valid range is from 0 to 250.
The valid range is from 32 to 65535.