Connectors; Rear Panel Connectors; To Erase The Rtc Ram; Lan Port Led Indications - Asus PRIME Z370-P Manual

To erase the RTC RAM:

1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two pins.
3. Plug the power cord and turn on the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-
enter data.
If the steps above do not help, remove the onboard battery and short the two pins again to
clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
1.7

Connectors

1.7.1

Rear panel connectors

1
9
1. PS/2 keyboard/mouse combo port. This port is for a PS/2 keyboard or PS/2 mouse.
2. LAN (RJ-45) port. This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub.

LAN port LED indications

Activity/Link LED
Status
Off
Orange
Orange
(Blinking)
Orange
(Blinking then
steady)
ASUS PRIME Z370-P
8
Speed LED
Description Status
No link OFF
Linked ORANGE 100Mbps connection
Data activity GREEN
Ready to _
wake up from
S5 mode
7 6
Description
10Mbps connection
1Gbps connection
_
2
3 4
5
Speed
Activity Link
LED
LED
LAN port
1-11