Table of Contents
Advertisement
Ipv4 / Ipv6 PXE Support [Disabled]
This item allows you to enable or disable the Ipv4/Ipv6 PXE wake event. Configuration
options: [Disabled] [Enabled]
2.6.10
HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
2.6.11
USB Configuration
The items in this menu allow you to change the USB-related features.
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled]
[Disabled]
[Auto]
USB Keyboard and Mouse Simulator [Disabled]
Enable this item to simulate USB keyboard and mouse to PS/2 module in Windows
Ensure to install the USB driver in your system before disabling this item. Configuration
options: [Disabled] [Enabled]
USB single port control
The subitems in this menu allow you to set the USB Port Disable Override features.
U31G1_1~8 [Enabled]
Allows you to enable or disable the USB3.0 ports individually. Configuration options:
[Disabled] [Enabled]
USB9~14 [Enabled]
Allows you to enable or disable the USB2.0 ports individually. Configuration options:
[Disabled] [Enabled]
2-36
Your system supports the USB devices in legacy operating systems.
Your USB devices can be used for BIOS setup only and cannot be
recognized in the boot devices list.
Your system automatically detects the presence of USB devices at startup.
If any USB devices are detected, the legacy USB support is enabled.
7.
®
Chapter 2: Getting started
Hide quick links:
Advertisement
Table of Contents
