Oc Tuner; Power-Saving & Performance Mode; Digi+ Vrm; Dram Timing Control - Asus PRIME Z370-P Manual

2.5.6 OC Tuner [Keep Current Settings]*
This item allows you to automatically overclock the CPU and DRAM frequencies and voltage
for an enhanced system performance. It also accelerates the CPU graphics performance to
the extreme depending on the CPU graphics loading. Configuration options: [Keep Current
Settings] [OC Tuner I] [OC Tuner II]
Ensure that you installed an efficient CPU fan for CPU and graphics loading before
selecting either [OC Tuner I] or [OC Tuner II]. To keep the current overclocking tuner
status, select [Keep Current Settings].
2.5.7 Power-saving & Performance Mode [Auto]
[Auto]
[Max Power-Saving Mode] Enables all power-saving settings for maximum energy-saving
[Performance Mode]
2.5.8 CPU SVID Support [Auto]
Disabling SVID Support stops the processor from communicating with the external voltage
regulator. Configuration options: [Auto] [Disabled] [Enabled]
2.5.9

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
2.5.10

DIGI+ VRM

CPU Load-Line Calibration [Auto]
Load-line is defined by Intel VRM specification and affects the CPU power voltage. The CPU
working voltage will decrease proportionally depending on the CPU loading. Higher levels of
the load-line calibration can get a higher voltage and a better overclocking performance but
increases the CPU and VRM thermal. Configuration options: [Auto][Level 1] [Level 2] ~ [Level
6] [Level 7]
The boosted performance may vary depending on the CPU specification. Do not remove
the thermal module.
CPU Current Capability [Auto]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously. Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
2-22
Automatically adjusts the power usage based on the system load.
condition.
Disables all power-saving settings for a high system performance.
Chapter 2: Getting started