4. Disable DHCP:
1 ) Go to
Network
2 ) Deselect
Enable DHCP Server
Now you can go to
WDS status
is Run, it means WDS bridging is successfully built.
Q5. I cannot access the Internet even though the configuration is
finished, what can I do?
1. Visit http://tplinkwifi.net.
2. Go to
Advanced
As the follow picture shows, if IP Address is a valid one, please try the methods
below and try again:
• Your computer might not recognize any DNS server addresses, please manually
configure DNS server.
>
DHCP
Server.
and click Save.
Advanced
>
Status
>
Status
to check Internet status:
>
Wireless
to check the WDS status. When the
86