Chapter 4
Set Up Internet Connection
5. Click Save.
Note:
It may take 1-2 minutes to make the settings valid.
6. After the connection succeeds, the screen will display as follows. Here we take
PPPoE as an example.
Tips:
1. If your Internet connection type is
BigPond
Cable, please go to
Advanced
>
Network
>
Internet
to set your router.
2. If you use
Dynamic IP
and
PPPoE
and you are provided with any other parameters that are not required on the
page, please go to
Advanced
>
Network
>
Internet
to complete the configuration.
3. If you still cannot access the Internet, refer to the
FAQ
for further instructions.
16