TP-Link Archer C8 User Manual page 13

Chapter 2
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will
be disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured
with the appropriate encryption before configuring the WPS.
1. Tab the WPS icon on the device's screen.
2. Immediately press the WPS button on your router.
AC1750 Wireless Dual
Band Gigabit Router
AC1750 Wireless Dual
Close to
Band Gigabit Router
Connect the Hardware
Model: Archer C8 IC:8853A-C8
Power: 12V 3.3A FCC ID:TE7C8
Default Access:
http://tplinkwifi.net
Username: admin
Password: admin
Model: Archer C8 IC:8853A-C8
Power: 12V 3.3A FCC ID:TE7C8
Default Access:
http://tplinkwifi.net
This device complies with part 15 of the FCC Rules. Operation is
Username: admin subject to the following two conditions:(1) This device may not cause
harmful interference, and (2) this device must accept any interference
Password: admin
received, including interference that may cause undesired operation.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
9