Denon AVR-X2300W Owner's Manual page 207

Contents Connections
o Manual
Enter the name (SSID) and password of the network you wish to
connect to.
1. Set the following items.
SSID:
Security:
Password:
Default Key:
2. Select "Connect" at the end of the setting.
Front panel Display
Playback
Input the name of the wireless network
(SSID).
Select the encryption method according
to the encryption setting of the access
point you are using.
Input the password.
Select the Default Key.
When connecting to a "WEP" encrypted
network, "Default Key" menu is
displayed.
Rear panel
Settings
0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or
tablet that supports wireless LAN connection.
0 When using a device that has a firmware version of iOS 7 or later, "When
connecting using Wi-Fi" (v p. 206) in "Use iOS Device".
1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3
seconds when the power of the unit is on.
2. Connect the wireless LAN of the PC or tablet used to "Denon AVR-X2300W"
when the message "Connect your Wi-Fi device to Wi-Fi network called "Denon
AVR-X2300W"" appears in the display.
3. Start up the browser and enter "192.168.1.16" in the URL.
4. Use the browser to enter the settings, select "Connect" and then exit the
settings.
207
Remote
Tips Appendix
Index