Denon AVR-X2300W Owner's Manual page 173

Contents Connections
Output Settings
Makes settings for video output.
0 "Output Settings" cannot be set when 4K signals are input.
0 "i/p Scaler", "Resolution", "Progressive Mode" and "Aspect Ratio" settings are
stored for each input source. ("i/p Scaler" (v p. 174), "Resolution" (v p. 175),
"Progressive Mode" (v p. 175), "Aspect Ratio" (v p. 176))
Front panel Display
Playback Settings
o HDMI Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
Monitor 1:
Monitor 2:
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "Resolution" is set to "Auto", the signals are output with a
resolution that is compatible with both TVs. (v p. 175)
When the "Resolution" setting in the menu is not set to "Auto", set the
resolution in "Video" - "HDMI Monitor 1" and "HDMI Monitor 2" to one that is
compatible with both TVs. (v p. 221)
0 You can check which resolutions are compatible with your TV in "HDMI
Monitor 1" and "HDMI Monitor 2". (v p. 221)
173
Rear panel
Tips
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
A TV connected to the HDMI MONITOR
1 connector is always used.
A TV connected to the HDMI MONITOR
2 connector is always used.
Remote Index
Appendix