Denon AVR-X2300W Owner's Manual page 14

Contents Connections
qw e r
u ioQ0 Q 1
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 65)
B Power indicator
This is lit as follows according to the power status:
White: Power on
0
Off: Normal standby
0
Red:
0
When "HDMI Control" is set to "On" (v p. 169)
0
When "HDMI Pass Through" is set to "On" (v p. 168)
0
When "Network Control" is set to "Always On" (v p. 210)
0
Front panel Display
Playback
t
Rear panel
Settings
y
C SOURCE SELECT knob
This selects the input source. (v p. 65)
D Remote control sensor
This receives signals from the remote control unit. (v p. 8)
E Display
This displays various pieces of information. (v p. 16)
F MASTER VOLUME knob
This adjusts the volume level. (v p. 66)
G Tuner preset channel buttons
(TUNER PRESET CH +, –)
These select preset broadcast stations. (v p. 84)
H ZONE2 ON/OFF button
This turns the power of ZONE2 (separate room) on/off. (v p. 145)
I ZONE2 SOURCE button
This selects the input source for ZONE2. (v p. 145)
J DIMMER button
Each press of this switches the brightness of the display. (v p. 217)
K STATUS button
Each press of this switches the status information that is shown on the
display.
14
Remote
Tips Appendix
Index