Denon AVR-X2300W Owner's Manual page 160

Contents Connections
o Power On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Mute:
1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0
dB". (v p. 159)
o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
–40 dB :
–20 dB :
Front panel Display
Playback
Use the memorized setting from the last
session.
Always use the muting on condition when
power is turned on.
The sound is muted entirely.
The sound is attenuated by 40 dB down.
The sound is attenuated by 20 dB down.
Rear panel
Settings
Audyssey ®
Set Audyssey MultEQ XT, Audyssey Dynamic EQ
®
Dynamic Volume . These can be selected after Audyssey
®
been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 260).
0 "MultEQ ® XT", "Dynamic EQ", "Reference Level Offset" and "Dynamic Volume"
settings are stored for each input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
160
Remote
Tips Appendix
and Audyssey
®
Setup has
®
Index
® XT",