Yamaha 2009 YZF-R1Y Owner's Manual page 28

INSTRUMENT AND CONTROL FUNCTIONS
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself automat-
ically and the display returns to the prior
mode after refueling and traveling 5 km
(3 mi).
Instantaneous fuel consumption mode
4
1. Instantaneous fuel consumption
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km".
G
When the display is set to "km/L",
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
G
When the display is set to "L/100
km", the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
To switch between the instantaneous
fuel consumption displays, push the
"SELECT" button for one second when
one of the displays is shown.
TIP
If traveling at speeds under 10 km/h
(6.0 mi/h), "_ _._" is displayed.
Average fuel consumption mode
1
1. Average fuel consumption
The average fuel consumption display
can be set to either "AV_ _._ km/L" or
"AV_ _._ L/100 km".
4-12
This display shows the average fuel
consumption since it was last reset.
G When the display is set to "AV_ _._
km/L", the average distance that
can be traveled on 1.0 L of fuel is
shown.
G
When the display is set to "AV_ _._
L/100 km", the average amount of
fuel necessary to travel 100 km is
shown.
To switch between the average fuel
consumption displays, push the "SE-
LECT" button for one second when one
of the displays is shown.
To reset the average fuel consumption
display, select it by pushing the "SE-
LECT" button, and then push the "RE-
SET" button for at least one second.
TIP
After resetting an average fuel con-
sumption display, "_ _._" is shown for
1
that display until the vehicle has trav-
eled 1 km (0.6 mi).