Echo PE-230 Operator's Manual
Power edger
Hide thumbs
Also See for PE-230:
- Operator's manual (36 pages) ,
- Operator's manual (32 pages) ,
- Operator's manual (28 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
Advertisement
Table of Contents
Related Manuals for Echo PE-230
Summary of Contents for Echo PE-230
-
Page 1: Serial Number
MODELS PE-230 Serial Number 05011201 - 05999999 WARNING DANGER Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation. X750003431 X7502098301 04/03... -
Page 2: Table Of Contents
NTRODUCTION Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job- dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operations tips and SAFETY messages. -
Page 3: Manual Safety Symbols And Important Information
If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specific information. These decals are in English only:... -
Page 4: International Symbols
Proper clothing and safety gear must be worn when operating an edger. Physical Condition Hearing Protection Your judgment and physical dexterity may not be good: ECHO recommends wearing hearing protection whenever • if you are tired or sick, unit is used. • if you are taking medication, •... -
Page 5: Extended Operation/Extreme Conditions
Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual. -
Page 6: Safe Operation
SAFE OPERATION WARNING DANGER Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manual • Provide all users of this equipment with the Operator's Manual and Safety Manual for instructions on Safe Operation. -
Page 7: Description
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. - Page 8 POWER HEAD - Factory assembled. Includes the engine, clutch, fuel system, ignition system and starter. THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged. STOP SWITCH - "Slide Switch"...
-
Page 9: Specifications
OWER DGER PERATOR ANUAL PECIFICATIONS MODEL ----------------------------------------------------- PE-230 Length ------------------------------------------------------- 1755 mm (69.1 in.) Width -------------------------------------------------------- 315 mm (12.4 in.) Height ------------------------------------------------------- 285 mm (11.2 in.) Weight (dry w/cutter head) ------------------------------- 6.1 kg (13.4 lb.) Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine Bore ---------------------------------------------------------- 32.2 mm (1.27 in.) -
Page 10: Assembly
(E). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted properly. The throttle linkage must be adjusted by moving the adjustment fixture (D). Consult with your Echo Dealer for correct adjustment procedure. -
Page 11: Front Handle
OWER DGER PERATOR ANUAL Bundle and secure ignition leads against engine housing with clip (F). FRONT HANDLE Tools Required: Cross-Head Screwdriver Parts Required: Front Handle, Lower Bracket, 4 - 5x35 mm screws, 4 - 5 mm nuts Assemble front handle and bracket loosely to drive shaft. Position front handle in comfortable operating position and tighten screws. -
Page 12: Pre-Operation
Echo premium Power Blend Universal 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past Storage - regardless of ratio specified in those manuals. Fuel storage laws vary by locality. Contact... -
Page 13: Operation
OWER DGER PERATOR ANUAL PERATION STARTING COLD ENGINE WARNING DANGER The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment off the ground and away from objects that could become entangled or thrown. -
Page 14: Starting Warm Engine
The attachment should not move at idle, otherwise serious personal injury may result. NOTE If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer. Stop Switch Move stop switch button (A) away from the STOP position. Primer Pump primer bulb (C) until fuel is visible in the "Clear"... -
Page 15: Operating Techniques
OWER DGER PERATOR ANUAL OPERATING TECHNIQUES 1. Before edging, water the area to soften the ground to make edging easier. Before edging, check the area and remove all obstacles and objects that could be thrown. Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass. -
Page 16: Maintenance
ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Dealer do it, each maintenance task has been graded. If the task is not listed, see your ECHO Dealer for repairs. -
Page 17: Air Filter
OWER DGER PERATOR ANUAL AIR FILTER Level 1. Tools required: 25 or 50 mm (1 or 2 in.) Cleaning brush Parts required: 90008 REPOWER Air & Fuel Filter Kit. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air filter is removed. -
Page 18: Spark Plug
SPARK PLUG Level 2. Tools Required: T-Wrench, feeler gauge, soft metal brush. Parts Required: REPOWER Tune-Up Kit P/N 90074 1. Remove spark plug and check for fouling, worn and rounded center electrode. Clean the plug or replace with a new one. DO NOT sand blast to clean. -
Page 19: Exhaust System
OWER DGER PERATOR ANUAL Remove spark plug lead. Remove two (2) muffler cover screws and muffler cover (A). Remove screw and arm rest (B). Remove cylinder cover (C). IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins. 5. -
Page 20: Carburetor Adjustment
The cylinder exhaust port must be inspected and cleaned of excess carbon every 3 months or 90 hours of operation in order to maintain this engine within the emissions durability period. ECHO strongly recommends that you return your unit to your ECHO dealer for this important maintenance service. CARBURETOR ADJUSTMENT... -
Page 21: Drive Shaft Lubrication
DRIVE SHAFT LUBRICATION Level 1. Tools required: 8 mm Open End Wrench, 4 mm Hex Wrench, Clean rag Parts Required: ECHO LUBE 8 oz. (P/N 91014) or Lithium Base ® Grease. Loosen two (2) screws (A) and remove center locating screw (B). -
Page 22: Blade Replacement / Lubrication
BLADE REPLACEMENT LUBRICATION Level 1. Tools Required: Scrench, Locking Tool, Needle Nose Pliers, 13 mm Open End Wrench Parts Required: ECHO LUBE 8 oz. (P/N 91014) or Lithium Base ® Grease, Blade P/N 69601552632, split pin P/N 90030020022 NOTE Grease gear case every 50 hours of use. Replace blade when it is worn shorter than 6 inches. -
Page 23: Troubleshooting
OWER DGER PERATOR ANUAL ROUBLESHOOTING t l i f l f f t ' n t n I t l i f t l i f t l i f t l i f / y t t r i WARNING DANGER Fuel vapors are extremely flammable and may cause fire and/or explosion. -
Page 24: Storage
TORAGE WARNING DANGER During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. Long Term Storage (over 30 days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following: Store unit in a dry, dust free place, out of the reach of children. - Page 25 OWER DGER PERATOR ANUAL NOTES...
- Page 26 NOTES...
- Page 27 OWER DGER PERATOR ANUAL NOTES...
-
Page 28: Servicing Information
• Sending a check or money order for $2.00 per Parts Catalog or $1.50 per Operator's Manual made payable to ECHO, INCORPORATED. State on a sheet of paper the model number and serial number of the ECHO unit you have, part number of the manual (if known), your name and address and mail to address above.