Features - Black Max 2800 PSI Operator's Manual

PRODUCT SPECIFICATIONS
Engine........................................................................................................................................................................ GCV160
Fuel Tank Capacity ..................................................................................................................................................... 0.25 gal
Maximum Pounds Per Square Inch Pressure* ......................................................................................................... 2,800 psi
Maximum Gallons Per Minute* ...................................................................................................................................2.3 gpm
Maximum Inlet Water Temperature ................................................................................................................................104˚F
*Max. rating determined by PWMA Standard 101, when tested with red nozzle
KNOW yOUR PRESSURE WASHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
6-IN-1 CHANGE-OVER NOZZLE
The 6-in-1 Change-Over Nozzle makes it easy to change
spray patterns.
AUTOMATIC DETERGENT INJECTION
SySTEM
Pour pressure washer detergent into the detergent tank to
apply detergent quickly and easily to your cleaning project.
Select soap setting to activate the detergent injector at a
20:1 dilution ratio.
ENGINE SWITCH
The engine switch is used in combination with the recoil starter
grip to start the engine. It is also used to turn the engine off.
FUEL TANK
This fuel tank has a maximum capacity of 0.25 gal. Use
unleaded automotive gasoline in the engine.
HONDA GCV160 ENGINE
This Honda engine enables the pressure washer to achieve
2,800 psi (pounds per square inch) at a rate of 2.3 gpm
(gallons per minute). Please read the engine manual included
with this product.

FEATURES

HOSE STORAGE
Once the high pressure hose is rolled, hang it on the hook
located on the side of handle. Use the hook-and-loop strap
to secure in place.
RECOIL STARTER
The recoil starter is pulled to start the machine.
SPARK ARRESTOR
This engine is not factory equipped with a spark arrestor.
In some areas it is illegal to operate an engine without a spark
arrestor. A spark arrestor is available by calling customer
service for assistance.
THERMAL RELIEF VALVE
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of
water. Once the water has drained, the thermal relief valve
will reset itself.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides
added control of the spray wand and helps reduce fatigue.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
Page 7 — English