Creating Dynamic Ip Wan Connection - D-Link DIR-300NRU User Manual

DIR-300NRU Wireless Router with Built-in 4-port Switch
User Manual

Creating Dynamic IP WAN Connection

To create a connection of the Dynamic IP type, click the Add button on the Net / WAN page. On
the opened page, select the Dynamic IP value from the Connection Type drop-down list and
specify the needed values.
Figure 73. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Port
Name
Enable
Direction
MTU
General settings
A physical or virtual interface to which the new connection will be
assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 92 of 172
Configuring via Web-based Interface
Description