Table of Contents
Advertisement
Getting Started
Compliant Bluetooth Devices
This unit can be connected to the following Bluetooth-compliant devices
for use.
Refer to the instruction manual of the device, except smartphones, to
check its Bluetooth profile.
Device Selection
(Bluetooth setting on
this unit)
Smartphone
BIP/OPP
GPS Receiver
Headset
CAUTION:
When registering a device, be sure to select the correct target device in
●
Bluetooth settings.
If the target device is wrong, connection cannot be established even if
the device is registered.
Although connections within a range of 10 m may be supported by this
●
unit, the nearer the device, the better the communication.
Perform communication at a location that is at least 2 m away from oth-
●
er electrical products, such as AV or OA equipment. In particular, com-
munication by this product is susceptible to influences by microwave
ovens. In this case, allow a distance of at least 3 m. Failure to do so
may result in communication errors. Also, reception of a TV or radio set
may deteriorate if it is placed near this product.
Communication may not be carried out properly near radio equipment
●
or broadcasting stations. In this case, change the location accordingly.
Radio wave interference by wireless LAN equipment
●
Wireless LAN equipment makes use of the same frequency bandwidth
(2.4 GHz) as that of the Bluetooth devices. Using this product near
such equipment may cause radio wave interference, and result in a
drop in communication speed or connection failure. In this case, turn
off the power of devices that are not in use.
20
Target Device/Compliant Profile
RIM
BlackBerry Bold 9000
●
BlackBerry Curve 8900
●
BlackBerry Curve 8310
●
HTC
Touch Diamond
●
Touch Pro
●
BIP (Basic Imaging Profile, Imaging Re-
sponsor)
OPP (Object Push Profile, Push Server)
SPP (Serial Port Profile, Device B)
HSP (Headset Profile, HS)
Registering a Bluetooth-compliant Device
In order to use a Bluetooth-compliant device with this unit, it is necessary
to perform registration (pairing) on this unit.
1
Touch D to display the menu.
.
2
Select "CONNECTION SETTINGS" and touch C.
.
3
Select "Bluetooth" and touch C.
.
4
Select the type of device to register and touch "REG."
.
Headset
You can use a headset (headphone that is integrated with
a microphone) to listen to the recorded audio sound dur-
ing shooting.
By configuring the "Bluetooth MIC AUDIO" setting in ad-
vance, you can insert narration into the movie while
shooting.
GPS Re-
You can use the GPS receiver to record the location infor-
ceiver
mation of a recorded movie or still image.
BIP/OPP
Transfers still image data to a Bluetooth-compliant device.
Smart-
You can use a registered mobile phone as a remote con-
phone
trol for this unit using the pre-installed application on the
phone.
Advertisement
Table of Contents
