Using The Operation Buttons; Using The Slider; Holding This Unit; Tripod Mounting - JVC GZ-HM550 User Manual

Hide thumbs Also See for GZ-HM550:
Table of Contents

Advertisement

Using the Operation Buttons

Functions of the operation buttons may be displayed on the screen ac-
cording to the feature in use.
.
To operate, touch the slider and buttons around the screen lightly with
your fingers.
Memo:
"Touch" denotes the touching of the operation buttons lightly.
The slider and buttons do not function if you touch them with your fin-
gernails or with gloves on.
The displays on the screen do not work even if you touch them.

Using the Slider

Slide the ball of your finger along the slider for smooth operations.
While the slider is being pressed, the cursor moves automatically.
Fine operations such as moving the cursor one by one can be performed
by touching the slider.
Refer to the operating instructions found in the animation on the De-
tailed User Guide.
Memo:
The slider and buttons do not function if you touch them with your fin-
gernails or with gloves on.
The displays on the screen do not work even if you touch them.

Holding this Unit

When holding this unit, keep your elbows close to your sides to prevent
camera shake.
.
CAUTION:
Be careful not to drop this unit during transportation.
Guardians should pay close attention when this unit is being used by
children.
Memo:
If camera shake is excessive, use the digital image stabilizer.
"Reducing Camera Shake" (A P.30)

Tripod Mounting

This unit can be mounted on a tripod. This is useful for preventing cam-
era shake and recording from the same position.
.
To prevent this unit from falling off, check the tripod mounting screw
holes and positioning holes on the unit carefully before mounting, and
turn the screws until they are fastened firmly.
CAUTION:
To prevent injuries or damages which may result if this unit falls off,
read the instruction manual of the tripod to be used and make sure that
it is securely attached.
Memo:
It is recommended to use the tripod when recording in conditions prone
to camera shake (such as in dark places or when zoomed to the tele-
photo end).
Set "DIS" to Z (OFF) when using a tripod for recording.
"Reducing Camera Shake" (A P.30)
Getting Started
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gz-hm545

Table of Contents