Cadillac 2006 CTS Navigation System Manual page 81

Hide thumbs Also See for 2006 CTS Navigation System:
Table of Contents

Advertisement

Previous
g
: Press the multi-function button next to
the Previous prompt to skip to the track immediately
before the current track on the current CD, if less than
eight seconds have played. If the current track has
been playing for more than eight seconds, pressing the
Previous button will take you to the beginning of the
current track. You can also use the steering wheel
controls to change tracks. See "Audio Steering Wheel
Controls" in your vehicle's owner manual.
If more than one CD is loaded in the CD changer and
you press the Previous multi-function button when
less than eight seconds have played, the CD changer
will skip to the CD loaded immediately before the current
CD. If it has been less than eight seconds, the changer
will skip to the beginning of the current CD. The
new CD will begin playing at track one.
o
p
SEEK/SCAN
(Six-Disc CD Changer Only): Use
the left or right arrow to skip to the previous or next
CD loaded in the CD changer. The new CD will begin
playing at track one.
Z
(Eject): Press the button with this symbol on it to
eject a CD. There is a separate eject button for each
player next to the CD slot. You will hear a beep once the
CD is removed from the slot.
If you press the eject button next to the CD changer,
the current disc will be ejected and the next one
will begin playing. Press and hold the eject button to
eject all of the discs loaded in the changer. You will hear
a double beep.
BAND: Press this button located to the left of the
screen once to switch to the radio while playing a CD.
The audio system screen will appear. See "Radio
Screen" listed previously for more information.
Loading the CD Changer
You can load up to six kc/s in the CD changer. To load
discs, use the following steps:
1. Press the LOAD button. You will hear one beep
and will be prompted to load the CD. The system
will switch to CD and begin playing the disc.
If you press and hold the LOAD button until
two beeps sound, you will be prompted to load all
six discs.
2. Slide discs one at a time, label side up, into the slot
located below the screen.
After each one is loaded, you will hear a beep. As the
discs are loaded, the horizontal lines located in the
lower left of the screen will change colors. If a line is
gray, it means that no CD is loaded in that slot. If a
line is green, it means that a CD is loaded in the slot.
The slot with the currently active CD is yellow.
3-25

Advertisement

Table of Contents
loading

Table of Contents