Rear Panel Input And Output Connections; Analog Inputs - Bryston SP1.7 Series Instructions Manual

REAR PANEL INPUT AND OUTPUT CONNECTIONS

RIGHT CENTER LEFT
RSURR SUB LSURR
BALANCED OUTPUTS
1
1. Balanced and 2. Unbalanced Outputs
The SP1.7 offers both balanced (5.1) and unbalanced (7.1) outputs for power amplifiers or powered loudspeaker
systems. The type you select to use will be determined by the input configuration of your amplifiers or self-
powered loudspeakers.
NOTE: XLR and RCA connectors can be simultaneously utilized. (Example - Surround fill channels)
Back channel(s) are only available from the RCA outputs.

3. Analog Inputs

A paired stereo analog input with gold RCA jacks (labeled L and R, for Left and Right) is provided for each
source button on the front panel.
The sensitivity of these Inputs is set to the industry standard of 2 Vrms, which should accommodate the vast
majority of available source components. In Bypass mode, the input sensitivity is equivalent to the BP-25
preamplifier.
A 5.1 channel analog input is also provided on 6 RCA connectors. This is typically used for Multi-channel
DVD-Audio, SACD, or external processors. In Bypass 5.1ch mode, the signal from the 5.1 channel analog
inputs (RCA) will be routed through the volume controls and to their respective outputs, balanced and
unbalanced. No bass management is available with the 5.1ch bypass mode.
4. Digital Audio Coaxial Inputs
The TV/SAT, DVD, CD, and AUX front panel selectable sources are also supplied with a standard SPDIF gold
RCA jack digital audio input. These four inputs will accept any standard SPDIF source including DAT, CDR and
similar components.
12
6
2
UNBALANCED OUTPUTS
L L
TAPE OUT VCR TAPE
RIGHT LEFT
R
R R
SUB CENTER
L
RSURR LSURR R BACK L
RSURR
BRYSTON DATE
LTD / LTEE
PETERBOROUGH, ONT.
MADE IN
CANADA
FABRIQUE AU
3
INPUTS
L
L
IN VCR AUX CD DVD TV/SAT
R R
COAX COAX COAX COAX
LSURR SUB CENTER RIGHT LEFT
5.1 CHANNEL ANALOG INPUT
4
9
RS-232
EXP .
RISK OF ELECTRIC SHOCK - DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
SERIAL NUMBER
SP1.7-
12V TRIG. OUT
1.6A 250V 0.5A 250V
OPT1 OPT2
LEFT FUSE RIGHT FUSE
AUX. IR
ON/OFF
C AUX
5 7 8 11
Figure 6: Rear Panel
12
120 V
60 Hz
252 VA
10