Table of Contents
Advertisement
23
RIGHT - ANALOG INPUTS - LEFT
SINGLE ENDED 1
BALANCED 1
SINGLE ENDED 2
BALANCED 2
RIGHT
OUTPUTS
13
Rear Panel
13.
Analog Balanced Output
Connect the right and left outputs to the
corresponding inputs of an amplifier. The 2nd
set of outputs can be used simultaneously. The
amplifier performs at its best when used with
amplifiers that have balanced inputs. if you must
use downstream amplifiers with only single
ended inputs, note that standard XLR to RCA
connectors are not compatible. Contact Bryston
to purchase appropriate interconnects with XLR
Pin 3 unconnected.
14.
Digital Inputs
Connect digital source components to these
jacks. When using USB with Microsoft Windows
source components, you may need to download
device drivers at
http://support.bryston.com/
downloads/USB%20Drivers/
15.
Trigger Out
These outputs can be connected to DC trigger
inputs of other equipment to modulate the
power state of connected equipment. For
example, you can automatically power on an
amplifier when the BR-20 is powered on. Trigger
2 can optionally be activated when a specific
source is selected.
16.
Control Section
Most aspects of the BR-20 can be controlled by
remotely using RS232 or IP when connected
through the RS232 or SVC Ethernet ports. A full
command set is available by entering ?. in the
8
HDMI 4
HDMI 3
USB AUDIO
AES 1
AES 2
SPDIF 1
DIGITAL INPUTS
LEFT
14
22
HDMI 2
HDMI 1
HDMI OUT
STREAMING
TOSLINK
SPDIF 2
1
2
RS232
1
2
TRIGGER OUT
15
terminal or from Bryston. Control for the built
in Media Player is available when the Streaming
Ethernet port is connected to the local area
network.
17.
Trigger Input
The BR-20 can be remotely turned on or placed
into standby when receiving DC voltage into this
port.
18.
A/C Power Input:
An IEC-320 C14 power inlet provides for
connection of an IEC-320 C13 equipped power
cord. Before connecting the power cord to the
amplifier, check that the voltage rating on the
data plate or ratings label conforms with your
locality.
19.
Data Plate
Unit specific information is printed here
including model number, operating voltage,
frequency, and serial number.
20.
Internal Streamer USB Accessory
The internal streamer can accept USB
accessories such as USB disks containing
music or a Bryston provided USB Wifi Adapter.
The blue ports operate at USB3.0 speeds and
are best for devices that can utilize that speed
such as SSD storage. The black ports operate at
USB2.0 speeds.
21.
Streaming Ethernet
In order to control the internal digital player,
your network must be connected to this port
unless you have fitted a Bryston WiFi adapter.
21
20
19
BP-18 PREAMPLIFIER
ETHERNET
USB ACCESSORY
USB
SVC ETHERNET
STATUS
IEC 320-C14
TRIGGER IN
POWER INLET
CONTROL
16
17
18
Advertisement
Table of Contents
