Lorex LH330 Edge2 series Quick Setup Manual page 2

Time
INTERNET REMOTE MONITORING
under 15 minutes under 30 minutes under 60 minutes over 60 minutes
Hand Tools Hardware Hi Speed
REMOTE INSTALLATION GUIDE
Time: 30 Minutes Hardware: Skills - Intermediate
Router
STEP 4
PC
Skill Level
easy Intermediate advanced
Auto Port Forward Wizard
1
NOTE: You must be on the same network as the DVR when
setting up the DDNS.
The Lorex Auto Port Forwarding Wizard is a software that
automates router port forwarding.
You must have the following before you configure the software:
1. Your router's model and version numbers
2. Your router's user name and password
3. Your Lorex device's IP address (recorded in Step 3-1)
4. Your Lorex device's port numbers that require port forwarding
(by default: 80)
Installation
2
1. Insert the software CD, and follow the instructions to launch
the Lorex Auto Port Forwarding Wizard software.
NOTE: The Wizard is PC compatible only. Mac users,
please go to Step 4-Optional (Manual Port Forward).
1: Populate the Router Database
3
The Auto Port Forwarding Wizard
automatically populates a list of
current routers, and detects the
number of connected routers.
1. Click Next after the software
detects your router configuration.
2: Enter your Router Settings
1. Under the Router drop-down list, select the model of your
router OR click the Search button to enter the name of
your router model.
NOTE: Ensure you select the proper model and firmware
number of the router (as it appears on the back of the router)
IMPORTANT: Default ports that must be port forwarded for
remote access:
Port 80 (HTTP Port)
NOTE: Click the Try to Auto Detect button if you have a
Linksys or Netgear router (this works with most models).
5
2. Under Router IP, click the Detect Router IP button.
The router's IP populates in the blank field.
3. Under Username and Password, enter the router's
username and password.
4. Under IP, enter the IP address
of your Lorex device as YOUR IP 80
recorded in Step 3-1.
5. Under Port, enter the port
number(s) that require
forwarding (80).
6. Click Next to continue.
INTERNET REMOTE MONITORING
INTERNET REMOTE MONITORING
STEP 4
Continued
3: Update the Router Settings
6
1. Click the Update Router
button. The program begins
updating the router settings.
This may take 20 - 30 seconds.
2. Close the update window
when the update finishes. 7
NOTE: You may have to manually
save your router settings after
the software makes the required
changes to your router.
4: Test your Connection
1. Click the Test Connection button. Your system's default
browser opens and connects to your Lorex device.
NOTE: Ensure that Internet Explorer is your system's default
internet browser.
OPTIONAL:
4
Manual Port Forward
If you were unable to port-forward your router
automatically using the wizard, you will need to
manually forward port 80 to your DVR' s IP address.
All routers are different. To port forward your router, please
refer to your router's user manual.
An example of a port forwarding screen is shown for
illustration purposes.
EXAMPLE
HTTP
80 80 12
DDNS (Dynamic Domain Name System) Set-up
Open your web browser (Internet Explorer by default) and
enter http://www.lorexddns.net in the address bar.
http://www.lorexddns.net
INTERNET REMOTE MONITORING
STEP 4
Continued
Create an Account Registration E-mail
8
An automated REGISTRATION CONFIRMATION E-MAIL
1. Click Step 1
will be sent to your email. Print and save this confirmation. You
2. Create a new My Lorex account or
will need to enter it into your system to enable remote access.
sign in using an existing account.
Domain Name/URL Request: tomsmith
Complete New Account Information DDNS User Name: tomsmith
NOTE: Warranty Registration is required for DDNS. DDNS Device Password: (your password)
1. Click Warranties.
9
2. Click Activate Warranty.
3. Under Your Address,
select an address or click
Enter a New Address
to create a new address.
Fill in your address
information and click
Create Address.
4. Fill in the warranty registration
form with your product and
purchase details and click Save
Warranty. Check the sticker
underneath your DVR for the
Product Model Number and
Serial Number.
5. Click Set Up a New DDNS.
6. Fill out the My
DDNS form:
• Product Warranty:
Select the product
warranty you created
in the previous steps.
• Device Name: Enter a name for your device. You can
enter your name, business name, or anything of your choice.
• MAC Address: Enter the MAC address of your Lorex
Install Edge Client Software
system recorded in Step 3-1.
10
• URL Request: Enter the web site address that will be
used to connect to your Lorex system.
NOTE: URL Request should not be more than 15 characters.
7. Click Save to register your product for DDNS. A DDNS
registration confirmation email will be sent to the email
address used to register for My Lorex.
INTERNET REMOTE MONITORING
STEP 4
Continued
Update Lorex Edge Client 12 Software for Remote Viewing
11
EXAMPLE
Enable DDNS on the DVR
To enable DDNS on your DVR:
1. Open Edge Client Software and click the Setup button.
2. Open the DDNS tab.
3. Configure the following:
• Under DDNS Select, select
http://www.lorexddns.net
from the drop-down.
• DDNS User Name: Enter the DDNS User Name
from the confirmation email that was sent to you after you
created your DDNS account.
• DDNS Password: Enter the Device DDNS
Password from the confirmation email.
• DDNS Domain Name: Enter the Domain name/
URL Request from the confirmation email.
5. Click Apply to save your changes.
NOTE: Please allow 10~15 minutes for the DDNS servers
to update with your new DDNS address before attempting
to connect.
(ON YOUR REMOTE COMPUTER)
1. Insert the software CD into your
remote computer.
The Autoplay window opens.
2. Click Run Lorex.exe
3. Click DVR Software then Edge
Client Software.
4. Follow the on-screen instructions to
install.
NOTE: Check the user's manual for how to install and use
the Edge Client software for Mac computers.
STEP 4
Continued
To add a new entry to your DVR list using the DDNS address:
1. Open the Edge Lorex Client 12 software and click DVR List. The
DVR List window opens.
2. Click Add.
3. Configure the following:
• Name: Enter the name you would like to use for your DVR.
You can use your name, your company or business name, or
anything of your choice.
• IP/DDNS: Enter the Domain Name/URL Request
followed by .lorexddns.net. For example, if the Domain Name/
URL Request is tomsmith, enter tomsmith.lorexddns.net).
• Port: Enter the HTTP port (default: 80) from the System
Information window.
• ID: Enter the admin ID for remote viewing (default: 9).
• Password: Enter the admin password for remote viewing
(default: 3333).
4. Click Change to save your settings. Then click Close to
return to the client window.
6. Select your DVR from the drop-down menu at the top of the
screen and click to connect. Live video from your cameras
will appear when the connection is successful.
NOTE: If there is no connection within 15 seconds, click
and click again to refresh the connection.
NOTE: Certain ISP (Internet Service Providers) block port
80. If you are unable to connect, check with your ISP and
consult with the user manual for instructions on changing the
HTTP port. Make sure to port forward your revised HTTP port.
REMOTE LIVE SITE
Congratulations! You have completed Step 4 successfully.
You can now connect over the internet to view, set up &
back up video from your DVR.
For Remote Connectivity using compatible
Smartphones and Tablets, refer to the
User's Manual. Make sure to complete
Instant
Step 4 entirely.
Mobile
Viewing
To connect using Mac, refer to the User's
Manual.
LH330 Edge2 Series Quick Setup Guide - English - R3