Table of Contents
Advertisement
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base. You can buy additional expansion handsets
(model AT&T CL80143/CL80173/CL80183/CL80193) for this telephone base
to expand your telephone system (up to 12 handsets).
Using a cordless handset:
1.
Press MENU/
Press q
or p
CID
/SELECT.
MENU
•
If you have one handset, the handset shows
Calling base.
•
If you have more than one handset, the handset shows
INTERCOM
device number (0 for the telephone base, 1-9 for
handsets 1-9,
10-12, or TONE followed by # for all devices),
q
or p
CID
/SELECT.
MENU
Calling HANDSET X, Calling BASE 0 or
Calling all devices.
The destination device(s) rings and shows HANDSET is
HANDSET X is calling or HANDSET X is calling all
the handset name, X represents the handset
2. To answer the intercom call, press
dialing key (0-9, TONE , or # ) on the called device. Both devices now
show Intercom.
3. To end the intercom call, one party presses
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
in idle mode to enter the main menu.
SELECT
to scroll to Intercom, then press
DIR
TO:
Use the dialing keys to enter a specific
TONE followed by 0-2 for handsets
to scroll to the desired device and press
DIR
Your handset screen shows
or press
(HANDSET represents
number).
PHONE/
FLASH
OFF/
46
Calling
HANDSET X
HANDSET X
is calling
Intercom
12/02
calling,
,
/SPEAKER or any
, or place the
CANCEL
11:35
AM
Advertisement
Table of Contents
