Acl - Planet ADE-3400 User Manual

The following table describes the parameters of this page:
Field
ACS
URL
User Name
Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
User Name
Password
Debug
Show Message
CPE sends GetRPC
Skip MReboot
Delay
Auto-Execution

3.5.6 ACL

Choose Service > ACL, the page shown in the following figure appears. In this page, you
can permit the data packets from LAN or WAN to access the router. You can configure the
IP address for Access Control List (ACL). If ACL is enabled, only the effective IP address
in the ACL can access the router.
Note:
If you select Enable in ACL capability, ensure that your host IP address is in ACL list
before it takes effect.
Description
The URL of the auto-configuration server to connect to.
The user name for logging in to the ACS.
The password for logging in to the ACS.
Select Enable to periodically connect to the ACS to chec k
whether the configuration updates.
Specify the amount of time between connections to ACS.
The connection username provided by TR-069 service.
The connection password provided by TR-069 service.
Select Enable to display ACS SOAP
serial console.
Select Enable, the router cont acts the ACS to obt
configuration updates.
Specify whether to send an MReboot event code in the
inform message.
Specify whether to st art the TR-069 program af ter a short
delay.
Specify whether to automatically start the TR-069 after the
router is powered on.
41
messages on the
ain