Advertisement
Before attaching/detaching the stand, be sure to turn the TV off.
Before performing any work, spread cushioning out over the base area to lay
the TV on. This will prevent it from being damaged.
Assemble the connection bracket, glass stand section and metallic gasket
together as shown below, then fasten with 4 self-tapping screws.
Fasten the assembled stand to the TV set and fix correctly as shown below.
Caution: Pulling, pushing or climbing on the TV may cause it to fall. Be careful to
ensure that children do not hang on the TV or otherwise destabalise it, as doing
so may cause the TV to fall over, causing injury or even death.
How to mount the LED TV.
1. After detaching the stand, fasten 4 mounting screws into the 4 screw
holes on the rear cover, as shown below.
2. Fasten the wall mounting (not supplied) with screws on the wall.
3. Carefully check the strength and integrity of the mount before releasing
the TV.
7
Advertisement
