Advertisement
▲ ▼
Press / key to select "Auto Search" option. Then
press OK key to start a notice window. In this notice
window, you can select country in the "Country
Selection" option and set "Tune Type" option.
The number of searched channels will be shown on the
screen. If you set "Tune Type" to "DTV+ATV", when the
searching of DTV channels is over, the TV will start to
search ATV channels. When the search is finished, all the
channels will be stored in memory, and a message will
appear on the screen as per the diagram on the right:
NOTE: If you want to exit the search, you can press EXIT
button.
▲ ▼
1. Press / key to select "EPG" option.
2. Press "OK" key to enter EPG submenu.
While this option is available in the TV software, analogue television signals are
no longer used.
In the ATV/DTV source, you can choose "DTV Manual
Search" to enter "DTV Manual Search" menu. You can use
◀ ▶
/ button to choose the channel and press OK button to
search, and then the TV will store the DTV channel if there
is a DTV signal present.
24
Advertisement
