Advertisement
Your TV has five picture settings (Standard, Soft, Vivid, User, Dynamic) that are
preset at the factory. Only "User" mode can be set to your preference by
adjusting particular items such as Contrast, Brightness, Color, Sharpness, Tint.
▲ ▼
Press / key to select "Picture Mode" option.
◀ ▶
Press / key to select one picture mode.
You can select the picture size which best corresponds to your viewing
requirement.
▲ ▼
1. Press / key to select "Aspect Ratio" option.
◀ ▶
2. Press / key to set the scale mode.
You can also press "Aspect" key on the remote control to select one of the scale
modes. Each source has different scale modes. (16:9, 4:3, Panorama, Movie,
Subtitle, Dot by dot)
You can change the colour of the entire screen
according to your preference.
▲ ▼
1. Press / key to select "Color Temp" option.
◀ ▶
2. Press / key to select one colour temp.
You can change the brightness of the entire screen according to your
preference.
▲ ▼
1. Press / key to select "Backlight" option.
◀ ▶
2. Press / key to select one backlight mode.
This option is only used when VGA mode has signal.
▲ ▼
Press / key to select "Window Adjust" option.
Press OK key to display the "Window Adjust" menu.
Auto Adjust: Allows you to set the TV to self-adjust to the
•
incoming PC video signal. The fine, coarse and position
values are adjusted automatically.
H-Position: Set horizontal position of picture.
•
V-Position: Set vertical position of picture.
•
Clock/Phase: Remove or reduce picture noise.
•
Standard: Keeps whites white.
Warm: Makes whites reddish.
Cool: Makes whites bluish.
23
Advertisement
