Table of Contents
Advertisement
Thumbnail operations (continued)
Deleting and protecting clips (OPERATION)
Clips may be deleted or protected.
1
Press the MENU button.
Menu operation (Page )
2
Select the OPERATION screen, and push the
Operation lever (or tilt in the
3
Tilt the Operation lever in the
to select item, and push the Operation lever.
DELETE:
ALL CLIPS:
Delete all clips.
Select whether or not to delete (YES/NO),
and push the Operation lever.
SELECT:
Delete selected clips.
Select clips with the Operation lever.
Selected clips will be outlined in orange.
(Repeat this operation to select multiple
clips.)
Press the EXEC button to confirm, tilt the
Operation lever in the
select whether or not to delete (YES/NO),
and push the Operation lever.
NO:
Return to the previous screen.
6
•
•
direction).
•
directions
directions to
•
•
Protected clips cannot be deleted.
If selecting ALL CLIPS to delete all clips from
the memory, this operation may take some
time to complete, depending on the volume of
clips to be deleted.
Deletion cannot be performed via the remote
control.
INDEX:
YES:
Attach indexes to selected clips.
1) Select clip to play, and push the
Operation lever at the point for an index
to be added.
) Select YES on the confirmation screen
to attach index.
• The point in the clip at which the index
will actually be attached will be accurate
to within an error of 0.5 seconds.
• To delete index, select INDEX→YES in
3
step
before performing the following.
1) Select clip to play, tilt the Operation
lever in the
the clip.
) Tilt the Operation lever in the
directions to move the pointer
between the points where indexes
are attached. Move the pointer to the
index to be deleted, and push the
Operation lever.
3) Select YES on the confirmation
screen.
NO:
Return to the previous screen.
It is not possible to add indexes to clips
recorded using a consumer camcorder model.
It is not possible to adjust the volume during
index playback.
direction, and pause
Advertisement
Table of Contents
