Table of Contents
Advertisement
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
Using the AC adaptor
Installation
1
Connect the DC cord to the AC adaptor.
2
Plug the AC power supply cord into the
power outlet.
3
Insert the DC cord's battery connector until
it clicks into place.
DC cord's battery
connector
22
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the battery while pressing the
battery release button.
•
Support the battery with your hand to ensure
that it will not fall.
PB
Mode lamp
Removal
1
Set the POWER switch to OFF, and check
that the mode lamp is off.
2
Remove the DC cord's battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cord from
the power outlet.
CAUTION:
•
Disconnect the AC power supply cord from
the power outlet when the unit is not going to
be used.
•
When the AC power supply cable is
disconnected from the power outlet, the power
lamp on the AC adaptor remains lit for a while
then shuts off. This is not a malfunction.
Battery release button
Advertisement
Table of Contents
