CrimeStopper CS-880.OEM Install Manual

CS-880 OEM
ALARM UPGRADE FOR
FACTORY REMOTE KEYLESS ENTRY SYSTEM
INSTALLATION PRECAUTIONS & WARNINGS
NOTE: This system does not improve or affect the range of the
factory remote keyless entry transmitters. This is an ADD-ON
system only. The arm/disarm range of this system will be identical
to that of the Factory Keyless' Lock/Unlock range.
BEFORE BEGINNING, check all vehicle manufacturer cautions and
warnings regarding electrical service (AIR BAGS, ABS BRAKES, AND
BATTERY).
DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED
with brake, and gas pedals, steering column, or any other moving parts
in the vehicle.
SUGGESTED COMPONENT MOUNTING
CONTROL MODULE: Underdash Mounting: If you are locating the
control unit underdash, conceal module away from any intruders. DO
NOT Mount the control unit or wiring harness where they can
become entangled with moving parts such as brake/gas/clutch
pedals, or the steering column.
LED: Mount the red LED in a visible location on the dashboard or
console.
Shock Sensor: Mount the included shock sensor with wire ties to an
under dash wire harness or fasten to a panel.
Disarm/Program Button: Mount the Override/Program push-button in
a hidden location easily accessible to the user in case the system must
be disarmed without the use of the transmitter. This switch is also used
to program certain features.
SIREN (CS-880S OEM Model): Mount the siren under the hood to inner
+
fender-well or other body surface with the open end facing downward.
TECH SUPPORT
Mon-Fri 8:00 AM-4:30 PM Pacific Time
(800) 998-6880