Aux Control - Bosch EXTEGRA IP 9000 FX Operation Manual

EXTEGRA IP 9000 FX
6
7
8
To control a peripheral, follow these steps:
1.
2.
6.1.4

AUX Control

Aux Control Tab
The AUX Control tab is used to enter pre-programmed keyboard control commands. These
commands are composed of a command number plus the appropriate function key (Show
scene, Set scene, AUX on, AUX off). A valid combination either issues a command to the
camera or displays an on-screen menu.
To access the AUX Control tab, go to the LIVE page and click the AUX Control tab.
(Refer to the User Command Table for a list of all AUX commands.)
By default, the device is configured for a total of 256 presets.
Some legacy systems may not support presets above 99. In this case, you can set the camera
to use only presets 1-99. Enter 151 on the keypad, and then click AUX on.
Bosch Security Systems
Iris open
Sets the pre-set scene for the corresponding button 1, 2, 3, 4, 5 and 6
Zooms the camera to pre-set scene numbers 1, 2, 3, 4, 5 and 6
Click the appropriate controls.
Move the mouse cursor over the video image. Additional options for controlling
peripherals are displayed with the mouse cursor.
Operation Manual
Operation | en 45
2015.03 | 1.0 |