Firmware And Ssl Certification Upload - D-Link DAP-3410 User Manual

Section 3 - Configuration
This page allows you to upgrade the firmware of the
access point as well as upload an SSL certificate to
secure the connections made to the DAP-3410. Make
sure the firmware or SSL certificate you want to use is on
the local hard drive of the computer. Please check the
D-Link support website for firmware updates by visiting
http://support.dlink.com. The DAP-3410 includes a
number of ways to update the firmware such as a direct
connection over the LAN, via a TFTP server, or via HTTP.
SSL certificates must be updated via the LAN connection.
Update Via Click on Browse to locate the firmware file to
Local PC: be used for the update. Click on Upgrade to
start the process of updating the firmware.
TFTP Server IP: Enter the IP address of the TFTP server that will
be used to upgrade the AP.
File Name: Enter the filename of the firmware hosted on
the TFTP server. Click on Upgrade to start the
process of updating the firmware.
Update Via Enter the URL of the HTTP server that will be
HTTP URL: used to upgrade the AP. This should be the
address of the server and the location of the
hosted firmware. Click on Upgrade to start the
process of updating the firmware.
Upload Click on Browse to locate the certificate file to
Certification be used. Click on Upload to start the process
From File: of transferring the certificate to the AP.
D-Link DAP-3410 User Manual

Firmware and SSL Certification Upload

48