Dhcp Server; Dynamic Pool Settings - D-Link DAP-3410 User Manual

Section 3 - Configuration
The DHCP address pool defines the range of the
IP address that can be assigned to stations in the
network. A Dynamic Pool allows wireless stations
to receive an available IP with lease time control. If
needed or required in the network, the DAP-3410 is
capable of acting as a DHCP server.
Function Select Enable to allow the DAP-3410 to
Enable/ function as a DHCP server.
Disable:
Start IP: Input the first IP address available for
assignment on your network.
End IP: Input the last IP address available for assignment
on your network.
Subnet Mask: All devices in the network must have the
same subnet mask to communicate. Enter the
submask for the network here.
Gateway: Enter the IP address of the gateway on the
network.
DNS IP: Enter the IP address of the Domain Name
System (DNS) server. The DNS server translates
domain names such as www.dlink.com into
IP addresses.
D-Link DAP-3410 User Manual

DHCP Server

Dynamic Pool Settings

33