D-Link DAP-3410 User Manual page 44

Section 3 - Configuration
This page will allow you to define specific routes that
will be broadcasted by the AP and made available to
the clients that connect to it.
Mode:
Select whether the route being offered is either
Disabled or Enabled.
Destination
Enter either the destination network, or the
Net/Mask:
subnet mask that will be used in the static
route.
Via:
Select whether the static route will be controlled
by an existing gateway, or if the interface on
the AP should route the traffic.
Gateway: This option becomes available if Gateway is
selected. Enter the gateway IP address.
Interface: This option becomes available if Interface is
selected. Enter the interface on the AP that will
be used with the static route.
Protocol:
Select the checkmark for the routing protocol
that will be used to advertise this static route
to other routers on the network.
D-Link DAP-3410 User Manual 44