Table of Contents
Advertisement
Troubleshooting
Starter kill doesn't work.
•
Is the correct starter wire being interrupted? If the car starts when the
starter kill relay is completely disconnected, the wrong starter wire has been
cut and interrupted.
•
YELLOW wire is not connected to true ignition. It is connected to an
accessory circuit.
Shock sensor doesn't trigger the alarm.
•
Has the NPC
disarming. To check this, turn the ignition key on and off to clear the NPC
from memory, and then retest the shock sensor. For a detailed description of
NPC
, see Owner's Guide.
®
Door input does not immediately trigger full alarm. Instead, I hear
chirps for the first three seconds.
•
That's how the progressive two-stage door input works! This is the instant
response feature of this system. Even if the door is closed immediately, the
system provides an instant trigger by chirping, and the progressing to a
constant siren.
Closing the door triggers the system, but opening the door does not.
•
Have you correctly identified the type of door switch system? This happens
often when the wrong door input has been used.
35
system been triggered? If so, you will hear five chirps when
®
© 20 0 8 D i re cte d E l ec tro n i cs- Al l ri g ht s res e r v e d.
®
Hide quick links:
Advertisement
Table of Contents
