Viper 3002 Installation Manual page 33

Press button once
Press button twice
Press button three times 4 light flashes
Press button four times 5 light flashes
Press button five times
Press button six times
Press button seven times 8 light flashes
Grouped Multi-Level Arming
After arming, immediately press the
the sensor warn-away zones will be bypassed.
After arming, immediately press the
the sensor warn-away and full alarm zones will be bypassed. All remaining zones are still active.
Multi-Level Off
No zones are bypassed. Pressing arm
in the armed state.
2-2 SIREN DURATION 30/60 SECONDS: It is possible to program the unit to sound for 30 or 60
seconds during the triggered sequence. Some states have laws regulating how long a security system
can sound. When using the 998T Bitwriter
time ranging from 1 to 180 seconds. Using the SELECT button of the 998T Bitwriter
siren duration in one second increments.
2-3 NUISANCE PREVENTION
of the same zone. If one zone is triggered three times in one hour, that zone is bypassed for one hour,
starting from the time of the third trigger. During that hour, if the system detects a trigger on that
zone again, the system resets the one hour timer. If one hour passes and the zone has not triggered
again, the zone is activated and can trigger the system again. NPC
door trigger, but does not bypass the ignition trigger at any time. If NPC
will respond to repeated triggers on the sensor inputs and will do so indefinitely. Some states have
laws regulating how many times a security system can trigger before it is considered a nuisance and
the vehicle is towed away.
2006
©
Directed Electronics
2 light flashes Zone 2 bypassed
3 light flashes Zone 4 bypassed
Zone 7 bypassed
Zone 2 and 4 bypassed
6 light flashes Zone 2 and 7 bypassed
7 light flashes Zone 4 and 7 bypassed
All zones except zone 5 are bypassed
button once. The parking lights will flash 3 times and all
button twice. The parking lights will flash 4 times and all
again will repeat the arm output, and the unit will remain
, the siren can be programmed to sound for any length of
®
CIRCUITRY (NPC
® ®
) ON/OFF: NPC stops repeated triggering
® ®
monitors sensor inputs and the
® ®
is turned off, the system
® ®
will adjust the
®
29