Honda BF250A Owner's Manual page 82

SERVICING YOUR OUTBOARD MOTOR
2 PIN COUPLER (BLUE)
FUEL HOSES
WATER SEPARATOR BRACKET
5. Disconnect the 2 pin coupler
(blue).
6. Remove the suspension strap from
the water separator bracket, and
then remove the suspension strap
from the water separator.
7. Bind the two fuel hoses with hose
clips to prevent fuel leakage, and
disconnect the fuel hoses.
80
DRAIN VALVE HOSE CLIPS
SUSPENSION STRAP
8. Bind the drain hose with the hose
clip, and disconnect the hose from
drain valve.
WATER SEPARATOR CUP
DRAIN HOSE
HOSE CLIP
WATER
SEPARATOR
9. Remove the three screws holding
10. Reassemble the water separator in
O-RING (Replace)
SCREWS
the water separator, empty the
water or deposits from the inside of
the cup.
the reverse order of removal. Use
a new O-ring.
TIGHTENING TORQUE:
2.5 lbf·ft (3.4 N·m, 0.35 kgf·m)