Water Separator Inspection And Service - Honda BF250A Owner's Manual

Hide thumbs Also See for BF250A:
Table of Contents

Advertisement

Water Separator Inspection and
Service
No.6 CYLINDER IGNITION COIL
WATER SEPARATOR
The water separator is located under
No. 6 cylinder ignition coil. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized Honda Marine dealer
for cleaning.
SERVICING YOUR OUTBOARD MOTOR
Gasoline is highly flammable and
explosive.
You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat,
sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
<Cleaning>
6 × 17 mm SPECIAL BOLTS
LEFT UNDER
COVER
6 × 17 mm
SPECIAL BOLTS
1. Remove the engine cover (p. 63).
2. Remove the plug maintenance
cover (p. 70).
3. Remove the cover under the idle
port.
4. Remove the left under cover by
removing the 6 × 17 mm special
bolts.
IDLE
PORT
COVER
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents