Advertisement
3) CONNECTING THE VIDEO TO THE TPS-IMW
Video is available for the TPS-6000, 5000 and 4500.
TPS-IMW supports balanced and unbalanced video
Before video can be enabled the TPS-VID card must be installed.
(For further information on installation please reference the TPS-VID manual)
Connect to a video source only if the TPS-VID expansion card is installed in the touchpanel. Possible options are
no connection, balance video using twisted pair cable, or unbalance video using twisted pair cable. Depending on
the option, the two jumpers on the NTSC/PAL VIDEO six-pin connector remain attached or are removed.
Advertisement
