Workgroup Bridge - Linksys LAPN300 User Manual

Linksys
Data - QoS Screen
QoS Setting
SSID
The index of SSID
SSID Name
The name of the SSID
VLAN ID
The VLAN ID of the SSID
Priority
Select the priority level from the list VLAN must be enabled
in order to set priority
The 802 1p will be included in the VLAN header of the
packets which are received from the SSID and sent from
Ethernet interface
WMM
Enable or disable WMM
WMM (Wi-Fi Multimedia) is a component of the IEEE 802 11e
wireless LAN standard for QoS
WMM provides prioritization of wireless data packets from
different applications based on four access categories:
voice, video, best effort, and background For an application
to receive the benefits of WMM QoS, both it and the client
running that application have to have WMM enabled
Legacy applications that do not support WMM and
applications that do not require QoS, are assigned to the
best effort category, which receives a lower priority than
voice and video
WMM is enabled by default

Workgroup Bridge

Workgroup Bridge feature enables the access point to extend the accessibility
of a remote network In Workgroup Bridge mode, the access point acts as a
wireless station (STA) on the wireless LAN It can bridge traffic between a remote
wired network and a wireless LAN
When Workgroup Bridge is enabled, SSID configuration still works to provide
wireless ser-vices to clients
All access points participating in Workgroup Bridge must have the identical
settings for Radio interface, IEEE 802 11 mode, Channel Bandwidth, Channel
(Auto is not recommended)
Figure 30: Workgroup Bridge
CHAPTER 2 Access Point Setup
23