Table of Contents
Advertisement
Linksys
Scheduler Association
Associate defined scheduler profiles with SSIDs
Figure 26: Scheduler Association Screen
Data - Scheduler Association Screen
Scheduler Association
SSID
The index of SSID
SSID Name
The name of the SSID
Profile Name
Choose the profile that is associated with the SSID
If the profile associated with the SSID is deleted, then the
association will be removed
If "None" is selected, it means no scheduler profile is
associated
Interface Status
The Status of the SSID It can be Enabled or Disabled
Scheduler only works when the SSID is enabled
Connection Control
Exclude or allow only listed client stations to authenticate with the access point
Figure 27: Connection Control Screen
Data - Connection Control Screen
SSID
Select the desired SSID from the list
Connection Type Select the option from the drop-down list as desired
•
Local: Choose either Allow only following MAC addresses
to connect to wireless network or Prevent following MAC
addresses from connection to wireless network You can
enter up to 20 MAC addresses of wireless stations or
choose the MAC address
•
RADIUS
Primary/Backup RADIUS Server - Enter the IP address of the
RADIUS Server
Primary/Backup RADIUS Server Port – Enter the Port number
of the RADIUS Server
Primary/Backup Shared Secret - This is shared between
the wireless access point and the RADIUS Server while
authenticating the device attempting to connect
•
Disabled
CHAPTER 2 Access Point Setup
21
Advertisement
Table of Contents
