Boot Menu - Oki ES6410 User Manual

B
OOT MENU
This menu should only be changed by the System Administrators. In order to gain access
to this menu, follow the instructions in
page 22.
This menu is in ENGLISH only (default settings in bold type).
Parallel Setup
NOTE
This menu item is applicable to the ES7411 only.
This menu controls the operation of the printer's Parallel data interface.
ITEM
Enter Password
Parallel
Bi-Direction
ECP
Ack Width
Ack / Busy Timing
I-Prime
Offline Receive
"How to change the settings - administrator" on
SETTINGS
xxxxxxxxxxxx
Enable / Disable
Enable / Disable
Enable / Disable
Narrow/
Medium/
Wide
Ack in Busy /
Ack while Busy
3µsec/50µsec
Disable
Enable / Disable
Menu functions > 41
EXPLANATION
Enter a password to access the Boot menu.
Password should be from 6 to 12 digits of alpha/numeric
characters (or mix)
The default value is "aaaaaa"
Enables or disables the parallel port.
ENABLE/DISABLE the bi-directional capability of the
parallel interface.
Extended Capabilities Port, enables/disables this
function.
Sets ACK width for compatible reception.
= 0.5µs
= 1.0µs
= 3.0µs
ACK IN BUSY: BUSY=LOW-> The end of ACK pulse.
ACK WHILE BUSY: BUSY=LOW -> The centre of ACK
pulse.
3 microseconds: Enabled with the 3µs nInit signal.
50 microseconds: Enabled with the 50µs nInit signal.
To Enable/disable of this function. When set to Enable,
the interface retains a receive possible state even when
switching to Offline. Interface sends the BUSY signal only
when the receive buffer is full or a service call occurs.