Other Useful Features; Using A Usb Device; Connecting A Usb Device; Selecting Usb Usage - Sharp LC-60LE830X Operation Manual

Other useful features

Using a USB device

The TV provides you some functions using a USB
device. You can select which function to use after
inserting a USB device in the USB port, and the TV starts
the settings for each function.
USB usage
E
Storage device for time shift
E
USB media to enjoy photos, music and videos

Connecting a USB device

Connect a USB device to the TV as shown below.
NOTE
• Some USB devices may not work properly for this function.
• Directly connect the USB storage device for time shift to the
USB port.
• Do not connect and disconnect a USB device from the TV
repeatedly.

Selecting USB usage

You need to select which function a USB device is used
for when the USB device is inserted in the USB port.
1
Connect a USB device to one of the USB ports.
• The screen prompt pops up.
NOTE
• If a USB storage device is inserted during time shift operation,
a screen prompt will not pop up.
2
Select the function you want to use.
Press c/d, and then press A.
USB media
NOTE
• When you want to configure a software update, you need to
press EXIT to close the window.
For time shift
You need to complete the following procedure to use the
USB storage device for time shift. After selecting "Time
shift", the TV starts initialising the USB storage device.
Follow the screen prompt to complete the setting.
1
Press c/d to select " Yes", and then press
A.
• Reconfirm use of the USB storage device for time shift.
44
Time shift
NOTE
• When you have inserted two or more USB storage devices
in the ports, an error message appears. Insert only one USB
storage device for time shift.
• You can also set the USB storage device to be used for time
shift in the "Device registration" menu (Page 47).
• At least 1 GB is required for a USB storage device for time
shift.
• A USB HDD cannot be used as a USB storage device for
time shift.
2
Press c/d to select " Yes", and then press
A.
• The TV starts initializing the USB storage device.
• Delete the data in the USB storage device.
NOTE
• Do not disconnect the USB storage device when the TV is
recognising the memory for time shift.
3
Select "OK".
Press A.
NOTE
• If an error message is displayed on the screen, follow the
screen prompts and remove the USB storage device.
Go to Time shift on page 45.
For USB media
After selecting "USB media", the TV switches to the USB
media.
Go to USB media/Home network on page 48.
NOTE
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on the
character set) may not be displayed.
• Do not disconnect a USB device or memory card from the TV
while transferring files, using the slide show function, when a
screen is switching to another or before you exit "USB media"
from the "INPUT" menu.
Disconnecting the USB device
When you disconnect the USB device, be sure to the
following steps.
For time shift
Go to "Menu" > "Setup" > "Option" > "Time shift
setting" > "Device removal".
NOTE
• This menu item cannot be selected when a USB storage
device for time shift is not registered.
• The USB storage device registration for time shift is cancelled
in the following cases:
− When the USB storage device is removed.
− When another USB storage device is registered for time
shift; only one USB device can be registered for time shift.
For USB media
Press B on the remote control unit while the
"Photo", "Music", "Video" folder or a sub-folder is
selected.