Time Shift - Sharp LC-60LE830X Operation Manual

Other useful features

Time shift

This function enables you to pause the digital TV programme
you are watching and start watching it again from the paused
scene.
1
Press READY.
• The TV starts temporary recording of the real time
broadcast in the background.
2
Press I.
• The TV shows the programme from the scene that the
TV started recording and the recording carries on.
• When the TV again playbacks after once pressing H to
stop the programme, the TV shows the programme from
the stopped scene.
Buttons for time shift operation
Buttons
Start recording the programme you are
watching.
• You cannot playback the recorded
READY
programme until approximately three
seconds after pressing READY to start
recording.
I
Playback the recorded programme.
Stop the programme in playback (time
H
shift recording continues) and go back to
the real time broadcast (live).
Pause the programme in playback (time
F
shift recording continues).
• This function is released in 15 minutes.
Reverse (each time you press this button,
S
the reverse speed changes in three levels).
Fast forward (each time you press this
J
button, the fast forward speed changes in
three levels).
Playback after jumping backwards by 10
a
seconds.
Playback after jumping forward by 30
b
seconds.
CONTROL*
1
Activate the control panel.
Playback will resume after jumping
2
c*
backwards by the time interval you set in
"Jump time setting" (Page 47).
Playback will resume after jumping forward
2
d*
by the time interval you set in "Jump time
setting" (Page 47).
I The CONTROL button is only available on the remote control unit.
J
The c and d buttons are only available on the control panel.
Description
NOTE
• Instead of pressing buttons on the remote control unit, most
of the operations shown to the left are also available on the
screen with the control panel. You can call up this control
panel by pressing CONTROL on the remote control unit or
select "Control (Time shift)" from "Option" > "Option for view".
• The control panel for time shift displays only during time shift
operation.
• The "Audio description setting" menu does not work during
time shift playback.
• When the amount of memory used for time shift reaches
"Full" and the blue point is around the left edge of the bar
 
in the Counter section on page 46), you
(see and
cannot operate some functions (F (Pause), S (Reverse),
a (Jumping backwards by 10 seconds), c (Jumping
backwards by the time interval you set in "Jump time setting"
(Page 47)).
• Time shift recording stops if no operation detected for three
hours.
• Time shift does not work for ATV, external inputs, data
broadcasts and radio broadcasts.
• To release time shift, press READY, change the DTV channel,
change "INPUT" or turn off the power of the TV.
• Time shift will be released if no operations are performed for
three hours.
• Some functions do not work during time shift.
• Time shift is not actually a recording function, so the recorded
data is reset when you exit time shift.
• Time shift does not work automatically, it starts only when you
press READY.
• The password is required when you use the buttons such
as S, J, a, b, c, d if you set the password
and any options for "Parental rating" except "No block" are
selected.
• Time shift does not work for any copy protected
programmes.
• For certain signals, resolution may be reduced during time
shift playback.
• Do not disconnect the USB storage device used for time shift
during time shift operation.
45