Teletext - Sharp LC-60LE830X Operation Manual

Watching TV

Teletext

What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV receives
teletext signals broadcast by a TV network, and decodes
them into graphical format for viewing. News, weather
and sports information, stock exchange prices and
programme previews are among the many services
available.
Turning teletext on/off
1
Select a TV channel or external source providing a
teletext programme.
2
Press m to display the teletext.
3
Press m again to display the teletext on the right
screen and the normal image on the left screen.
• Many stations use the TOP operating system, while some use
FLOF (e.g., CNN). Your TV supports both these systems. The
pages are divided into topic groups and topics. After switching
on the teletext, up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal, "No Teletext
available" displays.
• The same message displays during other modes if no teletext
signal is available.
TELETEXT
• Each time you press m, the screen switches as shown above.
NOTE
• Teletext will not work in 3D mode.
Buttons for teletext operations
Buttons
!r/s
Increase or decrease the page number.
Select a group or block of pages displayed
in the coloured brackets at the bottom of the
Colour (R/G/Y/B)
screen by pressing the corresponding colour
(R/G/Y/B) on the remote control unit.
Numeric buttons
Directly select any page from 100 to 899 by
0_9 using the 0_9 numeric buttons.
k (Reveal
Reveal or hide hidden information such as an
hidden teletext)
answer to a quiz.
Stop updating teletext pages automatically or
3 (Freeze/Hold)
release the hold mode.
Display the subtitle or exit the subtitle screen.
[ (Subtitle for
Subtitles will not be displayed when the service
teletext)
does not contain subtitle information.
Reveal or hide subpages.
Selects directly the desired subpage (0-9).
• Move to the previous subpage (R).
1 (Subpage)
• Move to the following subpage (G).
• These two buttons are shown on the screen
by the symbols "e" and "f".
Display the top menu.
A
• The top menu will not be displayed when the
service does not support top menus.
TELETEXT
Description
View setting
Text language
If Teletext information does not display correctly, perform
the procedure below.
Select from among four kinds of language tables: West
Europe, East Europe, Greek/Turkish and Cyrillic.
Each table is compatible with the Teletext languages
listed below.
1
Go to "Menu" > "Setup" > "View setting" >
"Individual setting" >"Text language".
Text language
Teletext language settings
West Europe
East Europe
Greek/Turkish
Select
• West Europe — English, French, Scandinavian, Turkish,
German, Spanish, Italian
• East Europe — Polish, French, Scandinavian, Czech,
German, Slovenian/Croatian, Italian, Rumanian
• Greek/Turkish — English, French, Scandinavian, Turkish,
German, Spanish, Italian, Greek
• Cyrillic — English, Russian, Estonian, Czech, German,
Slovenian/Croatian, Ukrainian, Lettish
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
Cyrillic
Back
19