Test Operation - Bryant TSTATBBNQ001 User's Information Manual

Step #5
Turn on the power to the Heating/Air
72
Conditioning system.
Heat Off Cool Fan On FanA uto
Adjust the Slide Switch until it is located
72
under the word HEAT on the thermostat.
Heat Off Cool Fan On FanA uto
Press the Up or Down buttons until the set
temperature is 10 degrees above room
temperature. The HVAC unit should
energize in the heating mode (pages 4-5).
Adjust the Slide Switch until it is located
72
under the word COOL on the thermostat.
Heat Off Cool Fan On FanA uto
Press the Up or Down buttons until the set
temperature is 10 degrees below room
temperature. The HVAC unit should
energize in the cooling mode (pages 4-5).
Adjust the Slide Switch until it is located
72
under the word OFF. Adjust the other slide
Heat Off Cool Fan On FanA uto
switch until it is located under the word Fan
On. The fan should turn on and run
continuously (pages 4-5).
Page 20

Test Operation