Presentation; Drill Motor And Stand - Husqvarna DMS 180 Operator's Manual

Drill motor and stand

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its'
content (using, service, maintenance etc) the life span and
the second-hand value of the machine can be extended. If
you ever lend or sell this machine, make sure that the
borrower or buyer gets the operator's manual, so they will also
know how to properly maintain and use it.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.

PRESENTATION

Stand
• The stand is for drilling in roofs, walls and floors.
• The base plate is made of aluminium and is therefore very
light weight. It has a integrated vacuum plate.
• The column can be tilted 0-60°.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
Drill motor
• DMS 180 is an electric drill, intended for drilling concrete,
brick and various stone materials.
• The drilling machine has a modular design and is easy to
assemble.
• The machine is intended for stand mounted drilling.
• The machine is water cooled.
– 9
English