Media Recommendation; Installation; Accessories - Konica Minolta magicolor 5550 Instructions Manual

Intro
The optional installed staple finisher enables you performing job separation, offset and stapled printing.
Below listed you will see the details regarding to installation, configuration, driver and printer menu settings
recommended to follow for easy usage.

1. Media recommendation

Maximum capacities of the sub and main tray are shown in the table below separated on modes:
Non Sort/Sort/Group:
Plain paper
Recycled paper
Postcard, Envelope,
Envelope, Glossy paper,
Label, Letterhead
Thick paper 1
Thick paper 2
Sort offset/group offset
Plain paper
Recycled paper
Sort stable:
Plain paper
Recycled paper
*Media length longer than 300 mm
# limited for high density images- 20sheets x 20 sets

2. Installation

Part number- Staple Finisher:
Part number Staple cartridge*: 4623361
(*included within new Staple Finisher- for changing procedure see page 7/ note 21a,
capacity: 5000 staples)
2.1. Acessories:
1.) Staple Finisher
2.) Relay Unit
3.) Main output tray
4.) Sub output tray
5.) Hooks (For securing the relay unit)
6.) Hooks (For installing the Staple Finisher)
7.) Mounting clips for the main output tray
60 – 90 g/m
Max. Paper
size: 216x356
-
Min. Paper
size: 92x148
91 – 150 g/m
151 – 210 g/m
Max. Paper
size: 216x356
60 – 90 g/m
Min. Paper
size: 182x257
Max. Paper size:
60 – 90 g/m
216x356
Min. Paper size:
182x257
A01F0Y1
Staple Finisher mc5550/5570
Max Capacity/sheets: Sub: 100(50*) , Main
2
500(250*)
Max Capacity/sheets: Sub: 20 , Main 20
2
Max Capacity/sheets: Sub: 20 , Main 20
2
Max Capacity/sheets: Sub: 20 , Main 20
Max Capacity/sheets: Sub: not supp. ,
2
Max Capacity/sheets:
2
Main:400 or 40 sets
(200 or 20 sets*)
Sub: not supp
- 3 -
Main 500 or 50 sets
(250 or 25 sets*)
No of sheets to
be stapled:
2 to 30 #