How To Create The Program - Crestron CT-1600 Operation And Installation Manual

Crestron Series 1600
Operations & Installation Guide - DOC. 5836A
Contents, search on Symbol Card File or from the Index search on the names of the
symbols for details.

How to Create the Program

Use the Configuration Manager workspace in SIMPL Windows to select and
configure all the devices that need to be included into the system. For this example,
add a CNXCOM-2 to slot #1 of the CNMSX-PRO. Also add a CT-1600 to the
system; its NET ID must be set to 03, shown after this paragraph.
NOTE: SIMPL Windows v1.30.01 or later is required to program the control
system containing a CT-1600 touchpanel. If using an earlier version of SIMPL
Windows, Crestron recommends a SIMPL Windows and operating system upgrade.
The latest version can be obtained from the Downloads page of the Crestron website
(www.crestron.com). New users are required to register in order to obtain access to
the FTP site.
Graphical System View of CT-1600 in SIMPL Windows' Configuration Manager
The lighting system communicates with port A of the CNXCOM-2 over RS-422
with 38400 N81 settings. These preferences for the port are set up in the
Configuration Manager. Click on the CNXCOM-2 in slot #1 of the CNMSX-PRO to
display the ports of the card in the Detail System View area of the Configuration
Manager. To assign the aforementioned settings, double click on the white field in
port A. The "Device Settings" dialog box opens. Confirm the parameters, shown
after this paragraph.
Wired Touchpanels
SeriesSeries 1600 Wired Touchpanels • 13