Hunter Set & Save 44155c Installation And Operation Manual page 45

5. Auto recovery – allows heating and cooling
systems to gradually recover from an
energy-saving setpoint temperature to a
comfort setpoint temperature. Auto recovery
calculates the time needed to adjust the
temperature to the next program setting.
When the thermostat is in Auto Recovery
mode, the display will flash alternating
messages of RECO and the time. Auto
Recovery can be disabled by sliding the
recovery switch on the back of the circuit
board to the disable position.
(Auto Recovery will not operate if Permanent or
Temporary holds are on.)
Hold/Return
Press during the Auto Recovery
process to manually cancel the recovery.
45