Steps
1. Align the screw holes on the power-button module with the screw holes on the front bezel.
2. Replace the two screws (M2x4) that secure the power-button module to the front bezel.
3. Connect the cables to the power-button module.
Next steps
1. Install the
front
bezel.
2. Install the top-cover.
3. Install the
right-side
cover.
4. Install the
left-side
cover.
5. Follow the procedure in
Alaplap
Removing the system board
Prerequisites
1. Follow the procedure in
NOTE:
A számítógép szervizcímkéje az alaplapon található. Az alaplap cseréje után a BIOS-beállító programban meg kell
adnia a szervizcímkét.
NOTE:
Az alaplap cseréje töröl minden módosítást, amit a BIOS-ban végzett a BIOS-beállító programmal. Az alaplap
cseréje után ismét el kell végeznie a megfelelő módosításokat.
NOTE:
A kábelek alaplapról történő eltávolítása előtt jegyezze fel a csatlakozók helyét, hogy az alaplap
visszaszerelésekor azokat megfelelően vissza tudja csatlakoztatni.
2. Remove the
left-side
3. Remove the
memory
modules.
4. Remove the
solid-state
5. Remove the
wireless
card.
6. Remove the
processor liquid-cooling assembly
After working inside your
Before working inside your
cover.
drive.
computer.
computer.
or
processor fan and heat-sink
assembly, as applicable.
Alkatrészek eltávolítása és beszerelése
91